A highly modular lift communication system, where the two-wire bus makes the 2N® Lift8 readily installable in any lift context. This means that when it comes to providing for emergency lift communications you won’t have to trouble with putting in new cabling. 2N® Lift8 meets all the applicable EU standards.
- Land-line replacement
- Trouble-free installation
- Lift monitoring by SMS report
Features & Benefits
-
LAND-LINE REPLACEMENT
Take advantage of the 2N® EasyGate as an ideal fixed line replacement for a lift communicator need. You’ll save the monthly fixed-line costs. -
LIFT MONITORING BY SMS REPORT
Check on the condition and functioning of your lifts. Thanks to lift monitoring contact and SMS messages you get an instant overview and can respond to any situation immediately. -
BACKUP POWER SUPPLY
In the event of a drop in the main power supply the gateway gets its power from the internal battery, guaranteeing operation to exceeding EN 81-28 specification. -
SIMPLE CONFIGURATION
Configuring of the advanced features can be done locally via the USB port or remotely via voice menu (DTMF) or SMS. -
PLUG & PLAY INSTALLATION
The basic installation consists of inserting a SIM card, entering the PIN code and connecting the existing analogue line device to the appropriate port on the gateway. Your GSM/UMTS gateway is immediately ready to make a call.
-
TROUBLE-FREE INSTALLATION
Save time when you install thanks to our ‘plug & play’ solution. Configure the advanced features remotely. There’s no waiting for a fixed line to be fitted. -
EVENT REPORTING
A switching contact is available, which can be used to signal an event via the GSM/UMTS gateway. The report is sent by SMS to a pre-set number. -
NOTIFICATION IN CASE OF POWER FAILURE
The gateway can send an SMS to inform not only about the failure or restoration of the primary power supply, but also the backup battery status. The battery status information can also be transmitted by P100 or CPC protocols if connected with 2N® Lift1. -
ZERO FIXED-LINE COSTS
The 2N® EasyGate can save on the cost of calls made from the lift. It reduced your monthly fixed line costs to zero.
| GSM model | |
| GSM networks: | 850/900/1800/1900 Mhz |
| GSM modules: | Cinterion MC55i-w |
| Data: | CSD (up to 14.4 kbit/s), GPRS Class 10 |
| SIM card: | 3 V and 1.8 V |
| GSM/UMTS model | |
| GSM networks: | 850/900/1800/1900 Mhz |
| UMTS networks: | 900/2100 MHz (EU version), 850/1900 MHz (US version), 850/2100 MHz (Japanese version) |
| Data: | HSDPA 3.6 Mbps, WCDMA, EDGE, GPRS |
| SIM card: | 3 V and 1.8 V |
| Antenna | |
| Connector type: | SMA |
| Impedance: | 50 Ohms |
| Line interface | |
| Interface type: | Two-wire, FXS for phone or external PBX line |
| Connector type: | RJ12, 6/2 |
| Supported modes: | DTMF and pulse |
| Power source | |
| Power unit supplied with the gateway (12 V/1 A) | |
| Option to connect an external 10 to 16 V DC power source | |
| Backup power using 4×AA batteries | |
| USB Interface | |
| Configuration and upgrade using 2N® PC Manager UNI | |
| Other | |
| Dimensions: | 163×157×38 mm |
| Operating temperature: | 0°C – 45°C |
| Operational status signalling: | 4×LED (on, GSM network, line, data), LED indicator – signal strength/battery status |
