A SIP-based microphone console for paging can appeal not only by wooden designer case, but also by various advanced functions such as broadcasting to 12 zones, two-way communication thanks to an inbuilt speaker, or playing back pre-recorded messages. All these functions are available without the need for server or distance limitations.
- Server-less paging to up to 12 zones
- Two-way communication
- Pre-recorded announcements
Features & Benefits
-
SERVER-LESS PAGING TO UP TO 12 ZONES
Get the latest technology in access systems. The Bluetooth module lets you eliminate access codes, entry cards, and key distribution.2N® SIP Mic uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.
-
PRE-RECORDED ANNOUNCEMENTS
Upload or record a message via the microphone and then play it by simple push of a button to a designated zone. It is an ideal solution for places where similar messages are broadcasted several times a day.
-
AXIS VAPIX® SUPPORT FOR PAGING
Broadcast directly from 2N® SIP Mic to compatible Axis Speakers and cameras.
-
LISTEN-IN FUNCTION
At simple press of a button one can listen to what is happening in certain zone.
-
SUPPORT FOR IP PBX (SIP)
The 2N® SIP Mic device may function independently or be simply connected to IP PBX.
-
TWO-WAY COMMUNICATION
Call from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
-
EASY CONFIGURATION
The zone, priorities and pre-recorded messages are simply configured via the web interface.
-
EASY INSTALLATION WITH A SINGLE CABLE
The 2N® SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
-
ANNOUNCEMENTS PRE-RECORDING
Record your own messages via the software application or using the microphone console itself.
| Audio parameters | |
| Audio stream: | SIP2.0, RTP multicast, VAPIX® |
| Audio codecs: | G.711u, G.722 |
| Speakers: | 2 build-in, stereo, power output 2x1W |
| Interfaces | |
| Logical inputs: | 2, galvanically separated, sensitive to contact or voltage from 5 to 48 V |
| Relay output: | 1, galvanically isolated, NO and NC contact, max load 48 V, 1 A |
| Headphone output: | 3.5 mm jack, stereo, power output 2×30 mW, min. load impedance of 16 Ohm, DR. 101 dB, THD+N -85 dB |
| Primary microphone input: | symmetric, XLR, integrated phantom power supply 24 V, DR 88 dB, THD+N -82 dB |
| Headset microphone input: | 3.5 mm jack, integrated power supply for electret microphones, DR 84 dB, THD+N -78 dB |
| Line input: | 3.5 mm jack, mono or stereo non-symmetric stereo, DR 93 dB, THD+N -82 dB |
| Power supply | |
| External power supply: | 12 to 32 V, power draw max. 1 A |
| Power over Ethernet: | PoE to 802.3af standard |
| Mechanical properties | |
| Dimensions: | 209 x 65 x 143 mm |
| Operating temperature: | 0°C – 40°C |
| Buttons and labels | |
| Label dimensions: | 39.6 mm width x 9 mm height |
| Double button: | 28 mm x 14 mm |
| Single button: | 14 mm x 14 mm |
| Smal buttons: | 9 mm x 9 mm |
