The 2N® IP Video Kit is a compact module unit intended to enhance any OEM with reliable video monitoring. In addition to video surveillance it will enhance functionality to include audio communications, remote monitoring and control.
- A VoIP solution you don’t have to develop
- Two analogue cameras can be connected
- A wide range of connectors
Features & Benefits
-
A VOIP SOLUTION YOU DON’T HAVE TO DEVELOP
2N® IP Video Kit makes it easy to incorportat IP video and audio into your existing device.
-
A WIDE RANGE OF CONNECTORS
Choose from a wide range of interfaces. Hook up a microphone, speaker, headphones or keypad buttons.
-
TIME PROFILES
This function allows you to define the period of time a phone number or access code is valid.
-
REMOTE CONTROL
The HTTP API allows OEM intercom systems to be easilyintegrated into the master system for remote administration.
-
ADAPTIVE VOLUME
2N® IP Video Kit automatically adjusts the speaker volume based on the ambient noise level.
-
TWO ANALOGUE CAMERAS CAN BE CONNECTED
There are two connectors for either PAL or NTSC composite video surveillance cameras.
-
SIP SUPPORT, WITH NO SERVER NEEDED
SIP protocol support makes it easy to link the intercom with IP phones and PBX from other producers, without having to connect to the server.
-
ONVIF PROTOCOL SUPPORT
The OEM intercom is easily integrated into surveillance systems utilizing the ONVIF protocol.
-
USER DEFINED SOUNDS
There are up to 10 user slots for uploading user-defined sounds (e.g. a vocal guidance or warning messages).
| Signalling protocol | |
| SIP 2.0 (UDP) | |
| Audio stream | |
| RTP/RTSP Protocols | |
| Codecs: | G.711, G.722 |
| Volume control: | adjustable, with auto adaptive mode |
| Full duplex: | Yes (AEC) |
| Power supply | |
| From an external source: | Typically 12V DC (9-36V DC), max. 2A |
| PoE: | 802.3af (Class 0 – Max. 12.95 W) |
| LAN interface | |
| LAN interfaces available: | 1 |
| PoE: | 802.3af |
| Parameters: | 10/100BASE-TX with Auto-MDIX, RJ-45 |
| Recommended wiring: | Cat-5e or better |
| Supported protocols: | SIP2.0, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog, ONVIF |
| Audio interface | |
| Microphone input: | Basic electret microphone |
| Amplifier output: | Amplifier class D, output MONO, THD < 1% Max. 10W/4Ω Max. 5W/8Ω Max. 2.5W/16Ω |
| Line output: | 600Ω |
| Video input | |
| Maximum number of cameras: | 2 analogue cameras |
| Input type: | composite PAL/NTSC |
| Buttons/keypad interface | |
| Number of buttons: | Up to 16 independent buttons in a 4 x 4 matrix |
| Matrix outputs: | 4 (ROW1-4 connectors), Uout<0,1V (L), Uout>3,2V (H), max. 8mA |
| Matrix inputs: | 4 (COL1-4 connectors), Uin< 1,15 (L), Uin> 2,15V, max. Uin = 5V |
| LED indicator outputs | |
| Number of outputs: | 3 (LED1+-, LED2+- and LED3+- connectors) |
| Output current: | Typically 20mA |
| Output voltage: | Max. 12V (note. 1) |
| Digital outputs | |
| Number of outputs: | 2 (OUT1+- and OUT2+- connectors) |
| Type of outputs: | Power output short circuit protection |
| Output voltage: | 12V (note. 1) |
| Active switch output: | 7 to 11 V DC depending on Power supply (PoE: 10 V; adapter: source voltage minus 2 V, max. 11 V DC), max 400 mA |
| Logical inputs | |
| Number of inputs: | 2 (IN1+- and IN2+- connectors) |
| Input type: | Galvanically isolated inputs (optocouplers) |
| Characteristics: | Uin < 1,1V (L), Uin > 3V (H), max. Uin = 32V |
| Relay output | |
| Number of outputs: | 1 (NC, NO, COM connectors) |
| Limiting parameters: | (DC) Max. 30VDC/1A |
| Limiting parameters: | (AC) Max. 125VAC/0.3A |
| Mechanical properties | |
| Operating temperature: | -40°C – 55°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Storage temperature: | -40°C – 70°C |
| Dimensions: | 142x98x34 mm (ord. ref. 9154100C), 138x90x26 mm (ord. ref. 9154101C) |
| Weight: | max. 280g (ord. ref. 9154100C), max. 150g (ord. ref. 9154101C) |
| Ingress Protection: | IP20 (ord. ref. 9154100C), IP00 (ord. ref. 9154101C) |
| Mounting: | on wall, or DIN rail |
| Note 1: If the device is supplied connected to a DC voltage source and the power supply voltage is below 12V, then the output voltage is limited to the value of the supply voltage. | |
2N® REMOTE CONFIGURATION
Attention: This is only a beta version of the service.
Using the free 2N® Remote Configuration service, you quickly and easily set up and maintain 2N devices from the comfort of your office, without need to travel. Activate the service at My2N portal and use a VPN to remotely access a complete web interface of 2N intercoms and access units.
2N® ACCESS COMMANDER
2N® Access Commander is intuitive software for administration of your access system, IP intercoms and attendance system from 2N. It combines simple installation, intuitive control and a web browser interface. It is installed on a virtual server and allows access to the settings via any mobile device or desktop computer. This means there is no need for each user to install the app on his or her own computer.
2N® IP EYE
The 2N® IP Eye is a freely available application that not only adds video to any phone but also provides video surveillance at your entrance. All you need is a door intercom with a camera and you can watch the video without the need for a videophone.
2N® NETWORK SCANNER
The 2N® Network Scanner is a simple, freely available application for locating 2N IP intercoms in the network. After searching the network, the application shows the type, firmware version and IP address of all intercoms found on a chart. This simplifies the administration and installation of intercom systems. Simply run the easy-to-use software to get immediate results.
