2N® SmartGate UMTS is a one-channel analogue UMTS gateway, which serves to reduce call costs. It also offers high-speed Internet access and the possibility of connecting in the so-called DialThru mode. What’s more, it is equipped with a backup power supply and provides features, such as 2N® Mobility Extension or a savings algorithm for call routing.
- Fixed-line replacement
- Fixed-line backup
- Easy installation including backup batteries
Features & Benefits
-
FIXED-LINE REPLACEMENT
Take advantage of the 2N® SmartGate fixed line replacement. Anywhere a fixed line is not available or where its operation would not pay for itself. -
FIXED-LINE BACKUP
Use the gateway as a backup for your fixed lines thanks to the dial-through regime and having both types of ports available: FXS and FXO. -
EASY INSTALLATION INCLUDING BACKUP POWER SUPPLY
Thanks to the ‘plug & play’ solution you don’t have to wait for a fixed line to be put in, or to spend time on device configuration. In addition, you also get a power supply backup. -
POWER SUPPLY BACKUP
In case of main power supply outage, the gateway gets its power from the internal battery. This makes it resistant against the power outages. -
2N® MOBILITY EXTENSION
Thanks to this service your mobile phone fully replaces an office fixed line. Whenever a call is coming in it rings at the same time.
-
DIALTHRU
Thanks to the FXS and FXO ports the gateway can connect to the PBX/phone and at the same time retain the existing fixed-line. -
SMS MONITORING
The GSM/UMTS gateway can keep you informed via SMS about an outage of the main power, its coming on again, and the status of the backup batteries. -
DATA TRANSFER
Using the UMTS gateway gives you not only voice but also data transmission, as well as access to the Internet over the UMTS network. -
AUTOMATIC DIALLING
In the event of a long lasting pick-up of the handset without dialling a number, a predefined number is dialled automatically. -
SMS INPUT
The gateway can also be used for monitoring. On detecting a switching SMS input, it can send a predefined SMS to a specified number. -
LCR – LEAST COST ROUTING
The LCR algorithm always picks the cheapest route for outgoing calls, using the most economical SIM card for the connection.
GSM/UMTS | |
GSM networks | 850/900/1800/1900 MHz |
UMTS networks: | 900/2100 MHz (EU version),850/1900 MHz (US version), 850/2100 MHz (Japanese version) |
Data: | HSDPA 3.6 Mbps, WCDMA, EDGE, GPRS |
SIM card: | 3 V and 1.8 V |
Data | |
UMTS / HSDPA: | UMTS 384 kbps downlink, 384 kbps uplink, HSDPA Category 5/6 3.6 Mbps max, HSDPA Category 12 1.8 Mbps max |
GPRS / EDGE: | GPRS Class B, multislot class 10 operations, EDGE, multislot class 12 operations |
Power source | |
Adapter: | 100-240 V/12 V; 0.5 A |
Backup power option using 4×AA batteries | |
USB Interface | |
Interface: | USB 2.0 full speed |
Connector: | USB type B |
FXS telephone interface | |
Interface type: | 2-wire analogue. FXS |
Connector type: | RJ12, 6/2 |
Option: | Tone (DTMF) and pulse |
FXO telephone interface | |
Interface type: | 2-wire analogue. FXO |
Connector type: | RJ12, 6/2 |
Option: | Tone (DTMF) |
Other | |
Dimensions: | 163×157×38 mm |
Operating temperature: | 0°C – 45°C |
Operational status signalling: | 4xLED (on, GSM network, line, data),LED indicator – signal strength/battery status |