The 2N® IP Uni intercom is the ideal solution for communication, in general purpose outdoor and indoor environments. Its easy operation and interface with the IP world will ensure nobody ever gets lost on the premises. In an instant, it connects you with, for example, reception or security and provides you with professional assistance.
- Easy installation
- Visual status signalling
- Replace your analogue intercom
Features & Benefits
-
EASY INSTALLATION
Its simple installation design means you will save not only time, but also installation costs.
-
REPLACE YOUR ANALOGUE INTERCOM
Thanks to the 2N® IP Uni you can simply and easily replace any existing analogue intercom.
-
SECURITY RELAY
This simple additional device prevents intrusion by detecting any unauthorized manipulation of the electronic locking system.
-
SUITABLE FOR THE DISABLED
The device can be fitted with an induction loop and pictograms suitable for communication with the hearing impaired.
-
BACKLIT BUTTONS
2N® IP Safety features 1 or 2 keys distinctively backlit in blue.
-
VISUAL STATUS SIGNALLING
Three pictograms inform you about the status of the door intercom: ringing, call in progress or door opening.
-
2N® REMOTE CONFIGURATION
Save time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customer’s requests.
-
TAMPER SWITCH
2N® IP Uni intercom can be fitted with a tamper switch that detects unauthorized opening of the device itself.
-
TIME PROFILES
This function allows you to define the period of time a phone number is valid.
-
SIP SUPPORT WITH NO SERVER NEEDED
SIP protocol support makes it easy to link the intercom with IP phones and PBX from other producers, without having to connect to the server.
| Signalling protocol | |
| SIP 2.0 (RFC – 3261) | |
| Buttons | |
| Design: | fully illuminated |
| Number of buttons: | 1 or 2 |
| Audio | |
| Microphone: | 1 built-in microphone |
| Speaker: | 1 W |
| Sound pressure at 1 kHz at 1 m distance: | 77.5 dB |
| Audio stream | |
| Codecs: | G.711 |
| Interfaces | |
| Power supply: | 12V±15%/ 2A DC, or PoE |
| PoE: | PoE 802 .3af (class 0-12.95 W) |
| LAN: | RJ-45, 10/100BASE-TX with Auto-MDIX |
| Passive switch: | NC/NO contacts, max 30 V/1 A AC/DC |
| Active output: | 8 to 12 V DC depending on Power supply (PoE: 9 V; adapter: source voltage – 2 V), max 500 mA |
| Supported protocols: | SIP2.0, RTP, HTTP, HTTPS, Syslog |
| Mechanical properties | |
| Operating temperature: | -40°C – 55°C |
| Storage temperature: | -40°C – 70°C |
| Storage relative humidity: | 10%-95% (non-condensing) |
| Coverage level: | IP54, IK10 |
| Dimensions: | 193x115x57 mm (max) |
2N® REMOTE CONFIGURATION
Attention: This is only a beta version of the service.
Using the free 2N® Remote Configuration service, you quickly and easily set up and maintain 2N devices from the comfort of your office, without need to travel. Activate the service at My2N portal and use a VPN to remotely access a complete web interface of 2N intercoms and access units.
2N® ACCESS COMMANDER
2N® Access Commander is intuitive software for administration of your access system, IP intercoms and attendance system from 2N. It combines simple installation, intuitive control and a web browser interface. It is installed on a virtual server and allows access to the settings via any mobile device or desktop computer. This means there is no need for each user to install the app on his or her own computer.
2N® NETWORK SCANNER
The 2N® Network Scanner is a simple, freely available application for locating 2N IP intercoms in the network. After searching the network, the application shows the type, firmware version and IP address of all intercoms found on a chart. This simplifies the administration and installation of intercom systems. Simply run the easy-to-use software to get immediate results.
