2N® EasyGate PRO is a single-channel analogue GSM / UMTS gateway suited not only for calls, but also for data, fax or SMS text messages. It is a solution based on mobile network used for a fixed line replacement. Compared with 2N® EasyGate, it can also be equipped with battery backup. This makes it especially suitable for environments requiring resistance against power outages.
- Land-line replacement
- Easy installation
- FAX services over the GSM network (GSM Fax version)
Features & Benefits
-
FIXED-LINE REPLACEMENT
Take advantage of the 2N® EasyGate PRO fixed line replacement. Anywhere a fixed line is not available or where its operation would not pay for itself. -
FAX SERVICES OVER THE GSM NETWORK (GSM FAX VERSION)
This one-channel analogue GSM/UMTS gateway provides not only for calls, but also for sending data, fax or SMS text messages. -
SMS MONITORING
The GSM/UMTS gateway can keep you informed via SMS about an outage the main power, its coming on again, and the status of the backup batteries. -
PLUG & PLAY INSTALLATION
Basic installation consists of inserting a SIM card, entering the PIN code and connecting the analogue line device to the relevant port on the gateway. After that, you can start making calls immediately. -
SMS INPUT
The gateway can also be used for monitoring. On detecting a switching SMS input, it can send a predefined SMS to a specified number.
-
EASY INSTALLATION
Thanks to the ‘plug & play’ solution you don’t have to wait for a fixed line to be put in, or to spend time on device configuration. In addition, you also get a power supply backup. -
BACKUP POWER SUPPLY (OPTIONAL)
In case of main power supply outage, the gateway gets its power from the internal batteries. This makes it resistant against power outages. -
CALL-METERING IMPULSES AT 16 OR 12 KHZ
2N® EasyGate PRO is equipped with a tariff impulse transmitter. These serve to determine the call pricing or duration of an attached device. -
AUTOMATIC DIALLING
In the event of a long lasting pick-up of the handset without dialling a number, a predefined number is dialled automatically. -
DATA TRANSFERS VIA HSPA (UMTS VERSION)
The UMTS version allows data transfer in the UMTS network alongside voice calls. You get a full-featuread equivalent of an ADSL line.
| GSM | |
| GSM networks: | 850/900/1800/1900 MHz |
| GSM modules: | Cinterion MC55i-w |
| SIM card: | 3V, 1.8V |
| Transmission power: | Max. 2 W |
| FAX | |
| Fax G3 analogue Fax | |
| Supported connections | |
| Voice calls | |
| Data connection: | CSD (up to 14.4 Kbit/s), GPRS class 10 |
| Antenna | |
| Connector type: | SMA |
| Impedance: | 50 Ohms |
| Power source | |
| Adapter: | 100-240 V/12 V; 0.5 A |
| Backup power option using 4×AA batteries | |
| Line interface | |
| Interface type: | Two-wire, FXS for phone or external PBX line |
| Connector type: | RJ12, 6/2 |
| Supported modes: | DTMF and pulse |
| Tariff impulses: | 16/12 kHz |
| Data interfaces | |
| USB (GPRS or CSD), RJ12 (CSD) | |
| Connector: | USB type B |
| Other | |
| Dimensions: | 163×157×38 mm |
| Operating temperature: | 0°C – 45°C |
| Operational status signalling: | 4×LED (on, GSM network, line, data) |
| LED indicator – signal strength/battery status | |
