The 2N® Access Unit RFID is an access control unit based purely on IP technology. It combines the functions of a traditional door controller and RFID reader, which significantly reduces installation, cabling, and maintenance costs. It supports cards or other media using 125 kHZ or 13.56 MHz frequencies.
- Simple installation with a single cable
- Advanced event reporting options
- NFC technology support for door opening
Features & Benefits
-
ACCESS SECURITY
Use 2N® Access Unit RFID to prevent unauthorised access to a building, ensuring the highest level of security for all people in the building.
-
NFC SUPPORT
Thanks to wireless NFC technology, you can easily open the door using a smartphone with the 2N® Mobile Key application installed.
-
WEB INTERFACE ADMINISTRATION
Simply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
-
MONITORING ENTRANCES AND EXITS
Other expansion modules (e.g. an exit RFID reader, keypad, or Bluetooth etc.) can be connected to the 2N® Access Unit RFID, allowing you to secure a door easily from both sides.
-
SIMPLE INSTALLATION
A single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.
-
2N® REMOTE CONFIGURATION
Save time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customers requests.
-
ADVANCED EVENT REPORTING
The 2N® Access Unit RFID not only allows logs to be sent to the Syslog server but also e-mail notifications to building security or an HTTPs command to a third-party system for selected events.
-
TAMPER PROTECTION
2N® Access Unit RFID is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.
-
INDOOR AND OUTDOOR USE
Thanks to its mechanical properties, the access unit is designed for either indoor or outdoor installation.
| Audio | |
| Speaker: | 0.8 W / 8 Ω |
| Interfaces | |
| Power supply: | 12V ±15% / 2A DC or PoE |
| PoE: | per standard 802.3af (Class 0 – 12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, terminal block or pigtail RJ-45 |
| Recommended wiring: | Cat5e or better |
| Passive switch: | NC/NO contacts, max 30 V 1 A AC/DC |
| Active switch output: | 8 to 12 V DC / max 550 mA |
| Inputs: | 3 inputs – can be used in passive or active mode (-30 V to + 30 V DC) |
| RFID card reader | |
| Supported frequency: | 13.56MHz & 125 kHz |
| Supported 13.56 MHz cards (only the serial number of the card is read – UID): | ISO14443A: Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, SmartMX, Ultralight, Ultralight C, SLE44R35, my-d move (SLE66Rxx), PayPass, Legic Advant |
| ISO14443B: Calypso, CEPAS, Moneo, SRI512, SRT512, SRI4K, SRIX4K, PicoPass, HID iCLASS | |
| Supported NFC devices: | smartphones with NFC (HCE support required) and the 2N® Mobile Key application, only for Android 4.3 or higher |
| Supported 125 kHz cards: | EM4100, EM4102, HID Prox |
| Expansion modules | |
| Modules from the intercom 2N® IP Verso: | RFID card reader (125kHz; 13.56MHz), fingerprint reader, Bluetooth module, keypad, touch display, I/O module, Wiegand, etc. are supported |
| Mechanical properties | |
| Frame: | Rugged zinc die-cast with surface finish |
| Operating temperature: | -40°C – 60°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Storage temperature: | -40°C – 70°C |
| Coverage level: | IP54 |
| Mechanical resilience: | IK08 |
| Dimensions: | Frame for surface mounting: |
| – 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Frame for recessing in wall: | |
| – 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Box for recessing in wall (dimensions of minimum hole in wall): | |
| – 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max gross weight: 2 kg / max net weight: 0.5 kg (depends on configuration) |
2N® REMOTE CONFIGURATION
Attention: This is only a beta version of the service.
Using the free 2N® Remote Configuration service, you quickly and easily set up and maintain 2N devices from the comfort of your office, without need to travel. Activate the service at My2N portal and use a VPN to remotely access a complete web interface of 2N intercoms and access units.
2N® ACCESS COMMANDER
2N® Access Commander is intuitive software for administration of your access system, IP intercoms and attendance system from 2N. It combines simple installation, intuitive control and a web browser interface. It is installed on a virtual server and allows access to the settings via any mobile device or desktop computer. This means there is no need for each user to install the app on his or her own computer.
2N® NETWORK SCANNER
The 2N® Network Scanner is a simple, freely available application for locating 2N IP intercoms in the network. After searching the network, the application shows the type, firmware version and IP address of all intercoms found on a chart. This simplifies the administration and installation of intercom systems. Simply run the easy-to-use software to get immediate results.
2N® MOBILE KEY
The 2N® Mobile Key application turns your mobile phone into an access card for passage through buildings. The application communicates with our selected 2N IP intercoms and 2N®Access Unit devices using NFC and Bluetooth technologies.
