2N® access unit bluetooth

access_unit_bt

An IP access control unit that lets users open a door using Bluetooth technology (BLE) and a smartphone or tablet. All you need is the 2N®Mobile Key installed on your mobile device. The 2N® Access Unit Bluetooth also supports two-factor user identification and is designed for locations with high-security levels.

 

  • Mobile credentials for free
  • Adjustable range for opening doors
  • Simple pairing process

Request Information

Features & Benefits

  • DIFFERENT MODES FOR DOOR OPENING

    Choose, whether the user opens a door through an application in their smartphone or keeps the phone in their pocket and opens the door by simply touching the unit.

  • SECURITY COMPARABLE WITH INTERNET BANKING

    Thanks to Bluetooth v4 (BLE) technology and encrypted communication between the access control unit and the 2N® Mobile Key application, your access details cannot be misused.

  • ADJUSTABLE COMMUNICATIONS DISTANCE

    Set the mobile telephone’s range for opening doors according to the type of installation – long distance for garage entry or short distance for passing through turnstiles

  • SIMPLE INSTALLATION

    A single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.

  • TAMPER PROTECTION

    2N® Access Unit Bluetooth is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.

  • INDOOR AND OUTDOOR USE

    Thanks to its mechanical properties, the access unit is designed for either indoor or outdoor installation.

  • SIMPLE PAIRING PROCESS

    You simply pair your mobile telephone with the access control unit in just three steps. To pair several units at once, you can use 2N® Access Commander.

  • MOBILE CREDENTIALS ARE FREE

    Unlike our competitors, 2N offers free mobile credentials. Other providers may charge you $6 to $10 per each credentialed user’s ‘virtual card.’ Simply install the 2N app and use its convenience and safety without further fees!
  • 2N® REMOTE CONFIGURATION

    Save time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customers requests.
  • TWO-FACTOR AUTHENTICATION

    For an extra level of security in guarded areas, for example, outside regular business hours, two-factor authentication can be set requiring users to confirm their identity by combining one mode of the door opening with a PIN code entered in the application.
  • ADMINISTRATION VIA WEB INTERFACE

    Simply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
  • MONITORING ENTRANCES AND EXITS

    Other expansion modules (e.g. an exit Bluetooth module, RFID reader, or keypad etc.) can be connected to the 2N®Access Unit Bluetooth, allowing you to secure a door easily from both sides.
  • DON’T PAY FOR NEW RFID CARDS

    Thanks to the 2N® Access Unit Bluetooth and the 2N®Mobile Key application, you no longer need to pay for each new or replaced RFID card. Our application replaces these cards and is free of charge.
Audio
Speaker: 0.8 W / 8 Ω
Interfaces
Power supply: 12 V ±15% / 2A DC or PoE
PoE: per standard 802.3af (Class 0 – 12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, terminal block or pigtail RJ-45
Recommended wiring: Cat5e or better
Passive switch: NC/NO contacts, max 30 V 1 A AC/DC
Active switch output: 8 to 12 V DC / max 550 mA
Inputs: 3 inputs – can be used in passive or active mode (-30 V to + 30 V DC)
Bluetooth Technology
Version: compatible with Bluetooth 4.0 or higher (BLE)
Reception sensitivity: up to -93 dBm
Range: adjustable (the maximum is more than 10 m)
Security: RSA-1024 and AES-128 encryption
Consumption: 20mA at 12V DC
Mobile applications: 2N® Mobile Key (support starting from Android 5.0 and iOS 11.0)
Expansion modules
Modules from the intercom 2N® IP Verso: RFID card reader (125 kHz; 13.56 MHz), fingerprint reader, Bluetooth module, keypad, touch display, I/O module, Wiegand, etc. are supported
Mechanical properties
Frame: rugged zinc die-cast with surface finish
Operating temperature: -40 °C – 60 °C
Operating relative humidity: 10 %-95 % (non-condensing)
Storage temperature: -40 °C – 70 °C
Coverage level: IP54
Mechanical resilience: IK08
Dimensions: Frame for surface mounting:
– 1 module: 107 (W) x 130 (H) x 28 (D) mm
Frame for recessing in wall:
– 1 module: 130 (W) x 153 (H) x 5 (D) mm
Box for recessing in wall (dimensions of minimum hole in wall):
– 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max gross weight: 2 kg / max net weight: 0.5 kg (depends on configuration)
Remote_configuration

2N® REMOTE CONFIGURATION

Attention: This is only a beta version of the service.


Using the free 2N® Remote Configuration service, you quickly and easily set up and maintain 2N devices from the comfort of your office, without need to travel. Activate the service at My2N portal and use a VPN to remotely access a complete web interface of 2N intercoms and access units.

2N® ACCESS COMMANDER

 

2N® Access Commander is intuitive software for administration of your access system, IP intercoms and attendance system from 2N. It combines simple installation, intuitive control and a web browser interface. It is installed on a virtual server and allows access to the settings via any mobile device or desktop computer. This means there is no need for each user to install the app on his or her own computer.

Access_commander_dashboard
network_scanner

2N® NETWORK SCANNER

 

The 2N® Network Scanner is a simple, freely available application for locating 2N IP intercoms in the network. After searching the network, the application shows the type, firmware version and IP address of all intercoms found on a chart. This simplifies the administration and installation of intercom systems. Simply run the easy-to-use software to get immediate results.

2N® MOBILE KEY

 

The 2N® Mobile Key application turns your mobile phone into an access card for passage through buildings. The application communicates with our selected 2N IP intercoms and 2N®Access Unit devices using NFC and Bluetooth technologies.

mobile_key_01