2N® 2Wire for Lifts is a practical converter allowing you to connect any IP device in the lift cabin; Even where there is no Ethernet. Its invaluable benefit is that you don’t need to add new lift cabling. Thanks to 2N® 2Wire you simply connect the required IP devices in the cabin to the existing travelling cable.
- Communications and Power supply on two wires
- Easy installation
- Long range transfer
Features & Benefits
-
COMMUNICATION AND POWER SUPPLY ON TWO WIRES
Connect any IP device even in places where there is no available IP infrastructure and have only two-wire line available. -
LONG RANGE TRANSFER
Powering the IP-connected devices via PoE is possible up to a distance of 220 m, twice as much as allowed by standard Ethernet cable length. -
ROBUST ALUMINIUM HOUSING
Thanks to its aluminum housing the 2N® 2Wire converter is extremely durable and meets the requirements of in-lift operation. -
RELIABILITY
Significantly more reliable than alternatives such as WiFi connection, especially for critical applications such as alarm communicators, which have to be constantly available. -
POWER SUPPLY
Included is an adapter with a selectable US/UK/EU plug.
-
EASY INSTALLATION
Simply connect the communication interface and power supply, and the device is ready for use. -
UNIVERSAL ETHERNET ‘EXTENSION’
The 2N® 2Wire brings Ethernet connectivity to areas without Ethernet infrastructure. A typical example is an elevator cabin where you need to connect an IP device, e.g. 2N IP intercoms, or lift communicators. -
UTILIZE EXISTING CABLING
With the 2N® 2Wire you can use the existing wiring and don’t have to lay new cables or make other modifications. -
SCREW-IN CONNECTORS
2N® 2Wire uses high-quality connectors, which prevents cables falling out, making it more reliable.
| Ethernet Interface | |
| Connector type: | RJ45 |
| Speed: | 10/100 Base T, half-duplex / full-duplex, auto-negotiation |
| IEEE 802.3af/at 40 W, PoE+ compatible | |
| Extension cable interface (2-wire/UTP) | |
| Cable type: | 2-wire, Cat 5e, Cat 6 or similar |
| Impedance: | 25 Ω to 100 Ω |
| Transfer range: | max. 220 m (720 ft) with Cat 6 |
| Transfer method | |
| Access method: | CSMA/CA and TDMA |
| Modulation method: | Windowed OFDM |
| Frequency band: | 1.8 MHz to 30 MHz |
| LED indicator lights | |
| Power supply: | Blue – power on |
| BNC: | Green – connection on |
| PoE: | Green – connection on |
| Electrical power supply | |
| AC input: | 100~240 VAC, 50~60 Hz |
| DC output: | 48 VDC / 0.84 A~1.3 A |
| Mechanical properties | |
| Dimensions: | 1.57 x 1.57 x 2.95 in, 40 x 40 x 75 mm (h x w x d) |
| Weight: | 120 g (4.2 oz) |
| Material: | extruded aluminium |
| Operating temperature: | -10°C – 50°C (14°F – 122°F) |
| Storage temperature: | -30°C – 70°C (-22°F – 158°F) |
